B0205-Ⅲ机床特征
配备背面刀台，实现主轴侧和背轴侧的完全同时加工；
搭载带Y轴背面刀台提供背面侧的复合加工能力（B0126- V/B0206- V）
・ 主轴/背轴采用高输出功率内藏电机，强化加工能力
・ 搭载带Y轴背面刀台，可以搭载*大6支动力头，对应各种背面加工需求（B0126- V/B0206- V）
・ 缩短加工节拍
采用固定式产品排出斜槽，和正面刀台无干涉，产品回收时间缩短为1秒
优化了滑块移动和动力头的启动动作，缩短停顿时间
・ *高转速10,000min-1前刀台动力头（选配），缩短小径孔加工的加工节拍
・ 根据工件可选择导套 · 无导套装置（选配）
备注:二手数控机床数量有限，照片和参数仅供参考不代表机床交付标准，均以实际购销合同为准！
所有咨询的客户均可获得一次售前专业顾问的解决方案.（预约可现场试机）
Front and back overlapped machining is possible with the back tool post.
Compact machine with back tool post with Y axis.Improves back machining capability.(B0126-V/B0206-V)
・ Enhances machining capabilities by high output built-in motor equipped on the main and back spindle.
・ Maximum of 6 live tools can be mounted on the back tool post, and it can flexibly handle a variety of back machining needs.(B0126-V/B0206-V)
・ Reduces cycle time.
Fixed type chute reduces the work collection time to one second.
Optimizes the slide movement and live tools start-up operation to reduce the idle time.
・ Live tool of front tool post (option) with max. speed of 10,000min-1 reduces the cycle time for small hole drilling.
・ Guide-bushing type or guide-bushless type is selectable according to the workpiece. (Option)
